Filter

Showing 601–657 of 657 results

  • Tom Baker – The Forth Doctor – A Dr Who Inspired Head Bust – 3″ – 6″ Wall Mount/Ornament

    £30.00
    Rated 0 out of 5

    Tom Baker – The 4rd Dr Who Head Bust – 3″ – 6″ Wall Mount/Orniment

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    Thomas Stewart Baker (born 20 January 1934) is an English actor and writer. He is well known for his portrayal of the fourth incarnation of the Doctor in the science fiction television series Doctor Who from 1974 to 1981,[1][2] a longer tenure than any other actor in the title role. He also provided narration in the television comedy series Little Britain (2003–2006) and Little Britain USA (2008).[1] His voice, which has been described as “sonorous”, was voted the fourth-most recognisable in the UK in 2006.[3]

    At age 15, Baker began study as a religious brother. He gradually lost his vocation, leaving religious life at age 21 to undertake national service in the Royal Army Medical Corps. Upon leaving the army, he served in the Merchant Navy and then became an actor, joining the Royal National Theatre under Laurence Olivier. He was in his thirties when his professional acting career began, and his first major film role was as Grigori Rasputin in Nicholas and Alexandra in 1971, when he was 37. He went on to play the villainous Prince Koura in The Golden Voyage of Sinbad in 1973, which led to his casting in Doctor Who.

    During his period as the star of Doctor Who, the original series received its highest viewing figures.[4] His era featured many stories which became regarded as classics and he remains one of the most instantly recognisable incarnations of the character.[5] He continued to feature in regular television roles later in his career, including in the series Medics (1992–1995), Randall & Hopkirk (Deceased) (2000–2001) and Monarch of the Glen (2004–2005). He has also narrated commercials, video games, audiobooks, radio plays, music albums, and television series.

    Baker has been married three times, firstly to Anna Wheatcroft with whom he had two sons, the second time being to his Doctor Who co-star Lalla Ward. Baker met his third wife Sue Jerrard whilst working at the BBC in London.

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Tom Baker – The Forth Doctor – A Dr Who Inspired Head Bust and Plinth Sculpture

    £30.00
    Rated 0 out of 5

    Tom Baker – The 4rd Dr Who Head Bust and Base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    Thomas Stewart Baker (born 20 January 1934) is an English actor and writer. He is well known for his portrayal of the fourth incarnation of the Doctor in the science fiction television series Doctor Who from 1974 to 1981,[1][2] a longer tenure than any other actor in the title role. He also provided narration in the television comedy series Little Britain (2003–2006) and Little Britain USA (2008).[1] His voice, which has been described as “sonorous”, was voted the fourth-most recognisable in the UK in 2006.[3]

    At age 15, Baker began study as a religious brother. He gradually lost his vocation, leaving religious life at age 21 to undertake national service in the Royal Army Medical Corps. Upon leaving the army, he served in the Merchant Navy and then became an actor, joining the Royal National Theatre under Laurence Olivier. He was in his thirties when his professional acting career began, and his first major film role was as Grigori Rasputin in Nicholas and Alexandra in 1971, when he was 37. He went on to play the villainous Prince Koura in The Golden Voyage of Sinbad in 1973, which led to his casting in Doctor Who.

    During his period as the star of Doctor Who, the original series received its highest viewing figures.[4] His era featured many stories which became regarded as classics and he remains one of the most instantly recognisable incarnations of the character.[5] He continued to feature in regular television roles later in his career, including in the series Medics (1992–1995), Randall & Hopkirk (Deceased) (2000–2001) and Monarch of the Glen (2004–2005). He has also narrated commercials, video games, audiobooks, radio plays, music albums, and television series.

    Baker has been married three times, firstly to Anna Wheatcroft with whom he had two sons, the second time being to his Doctor Who co-star Lalla Ward. Baker met his third wife Sue Jerrard whilst working at the BBC in London.

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Tortle Druid – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Tortle Druid – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Tortle Monk – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Tortle Monk – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Tortle Wizard – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Tortle Wizard – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Triton Pirate – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Triton Pirate – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • TROLL – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    TROLL – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • Turtle Mounted Manatee – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Turtle Mounted Manatee – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Tyrant Paladin – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Tyrant Paladin – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Undead Beholder – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Undead Beholder – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Uther – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Uther – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • VAMPIRE – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    VAMPIRE – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • VAMPIRE_COUNT – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    VAMPIRE_COUNT – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • Village Houses – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village Houses – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Village-building1 – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village-building1 – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Village-building2 – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village-building2 – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Village-building3 – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village-building3 – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Village-building5 – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village-building5 – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Village-building6 – Legend of Zoontalis – DiceHeads – Terrain

    £28.00
    Rated 0 out of 5

    Village-building6 – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Violet Fungus – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Violet Fungus – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Voonith – Mythos Madness – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Voonith – Mythos Madness – DiceHeads – Model and base Why not add some Lovecraftian Mythis Madness to your diceheads tabletop gaming bundles. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Wall Sconce Woman – 6″ Standing figure on a base

    £36.00
    Rated 0 out of 5

    Wall Sconce Woman – 6″

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Walrus Paladin – Legend of Zoontalis – DiceHeads – Terrain

    £7.50
    Rated 0 out of 5

    Walrus Paladin – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Walrus_pirate – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Walrus_pirate – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • WAR – Army of the Apocalypse – Dark Fantasy – Model and base

    £18.00
    Rated 0 out of 5

    WAR – Army of the Apocalypse – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • War Banner – Dark Fantasy – Model and base

    £9.00
    Rated 0 out of 5

    War Banner – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • Warrior Women small – 6″ Standing figure on a base

    £30.00
    Rated 0 out of 5

    Warrior Women small – 6″ Standing figure on a base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • WARRIOR_ORC – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    WARRIOR_ORC – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • WARRIOR_TROLL – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    WARRIOR_TROLL – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • WARRIOR_WOLF – Dark Fantasy – Model and base

    £16.00
    Rated 0 out of 5

    WARRIOR_WOLF – Dark Fantasy – Model and base This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • WARRIORS – Army of the Apocalypse – Dark Fantasy – x6 Models and bases pack

    £30.00
    Rated 0 out of 5

    WARRIORS – Army of the Apocalypse – Dark Fantasy – x6 Models and bases pack This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
  • Water weird – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Water weird – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Weasel Bandit – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Weasel Bandit – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Weasel Paladin – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Weasel Paladin – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Weasel Zombie – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Weasel Zombie – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Weasel-Rider – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Weasel-Rider – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Werewolf – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Werewolf – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • White Dragon – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    White Dragon – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Wilbur-Whateley – Mythos Madness – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Wilbur-Whateley – Mythos Madness – DiceHeads – Model and base Why not add some Lovecraftian Mythis Madness to your diceheads tabletop gaming bundles. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Will-O-Wisp – Legend of Zoontalis – DiceHeads – Terrain

    £7.50
    Rated 0 out of 5

    Will-O-Wisp – Legend of Zoontalis – DiceHeads – Terrain It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • William Hartnel – The First Doctor – A Dr Who Inspired Head Bust – 3″ – 6″ Wall Mount/Ornament

    £30.00
    Rated 0 out of 5

    William Hartnell – The 1st Doctor Head Bust – 3″ – 6″ Wall Mount/Orniment

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    William Henry Hartnell (8 January 1908[1] – 23 April 1975) was an English actor. While Hartnell made numerous stage and television appearances and acted in over 75 British films, he is best remembered today as the First Doctor in BBC Television’s Doctor Who, which he played from 1963 to 1966.[2] He was also well known for his roles as Sergeant Grimshaw, the title character of the first Carry On film, Carry On Sergeant in 1958, and as Company Sergeant Major Percy Bullimore in the sitcom The Army Game from 1957 to 1961.

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • William Hartnel – The First Doctor – A Dr Who Inspired Head Bust and Plinth Sculpture

    £30.00
    Rated 0 out of 5

    William Hartnell – The 1st Doctor Head Bust and Base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    William Henry Hartnell (8 January 1908[1] – 23 April 1975) was an English actor. While Hartnell made numerous stage and television appearances and acted in over 75 British films, he is best remembered today as the First Doctor in BBC Television’s Doctor Who, which he played from 1963 to 1966.[2] He was also well known for his roles as Sergeant Grimshaw, the title character of the first Carry On film, Carry On Sergeant in 1958, and as Company Sergeant Major Percy Bullimore in the sitcom The Army Game from 1957 to 1961.

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • William Wallace lg – 8″ Standing figure on a base

    £36.00
    Rated 0 out of 5

    William Wallace lg – 8″ Standing figure on a base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Witch Plaque – Celtic Banding – 9″ Plaque/wall hanging or home dΓ©cor

    £39.00
    Rated 0 out of 5

    Owl PlaqueWitch- celtic bandingThis model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Wizard – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Wizard – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Wizard 1 – 6″ Standing figure on a base

    £30.00
    Rated 0 out of 5

    Wizard Small – 6″ Standing figure on a base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Wizard 2 small – 6″ Standing figure on a base

    £36.00
    Rated 0 out of 5

    Wizard 2 small – 6″ Standing figure on a base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Wizard and Dragon – 8″ Standing figure on a base

    £36.00
    Rated 0 out of 5

    Wizard and Dragon – 8″ Standing figure on a base

    Follow us on facebbok πŸ™‚
    https://www.facebook.com/Cr83d.Ayrshire

    This model and many more are available in store, We do pop culture, rock and roll as well as fantasy, historical and mythical.

    Thanks for checking in on us and for your ongoing support.
    CR8ED Out Of Hand

    Sculptor – Sandy Campbell
    3D Scanning and Printing – CR83D

    Add to basket
  • Wraith – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Wraith – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Y-Golonac – Mythos Madness – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Y-Golonac – Mythos Madness – DiceHeads – Model and base Why not add some Lovecraftian Mythis Madness to your diceheads tabletop gaming bundles. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Yak-Druid – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Yak-Druid – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Yeti – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Yeti – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Yith – Mythos Madness – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Yith – Mythos Madness – DiceHeads – Model and base Why not add some Lovecraftian Mythis Madness to your diceheads tabletop gaming bundles. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Zombie – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Zombie – DiceHeads – Model and base This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Zombie Bear – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Zombie Bear – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • Zombie Mouse – Legend of Zoontalis – DiceHeads – Model and base

    £7.50
    Rated 0 out of 5

    Zombie Mouse – The Legend of Zoontalis – DiceHeads – Model and base It’s time to add The Legends Of Zoontalis to compliment your diceheads tabletop gaming bundles and Now With and Added RPG Module. This Dice Heads original model is a perfect stand out addition to your gaming table! All Models are Printed To order. Sizes between 3cm -8cm All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Diceheads team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – http://www.patreon.com/diceheads

    Add to basket
  • ZOMBIES – Army of the Apocalypse – Dark Fantasy – x6 Models and bases pack

    £30.00
    Rated 0 out of 5

    ZOMBIES – Army of the Apocalypse – Dark Fantasy – x6 Models and bases pack This Dark Fantasy original model is a perfect stand out addition to your gaming table! All Models are Printed To order. All of our models are printed in high quality resin at 4k resolution and while we take care in producing the best models we can, we will do the minumim of post production on the models to keep costs down and as such there may be small support marks that will need a very light sanding to remove…….. but that’s half the fun πŸ˜€
    Each Model will be printed and distrubuted by us here at Cr8-3D, All models are printed at the original sizes and come unpainted. This image is a rendered version of the STL model created by the Dark Fantasy team. The final printed result will vary slightly from the rendered Image. You can Follow DiceHead over on Patreon at – Add Link

    Add to basket
Scroll to Top